News
En Fa

Friday 29 March 2024

Carbon Column Filter

Pilot Carbon Column Filter Absorbent columns are used in the refining process to measure the absorption of various types of contaminants and chemical or physical parameters. The height and diameter of the pilot can be changed in terms of discharge and type of absorbent according to the design. Gravity and pressure can also be modeled and applied.   Performance: This pilot column is an active carbon that drains upstream and out of it. Due to the porosity of the material inside the column and the gravity of the pilot, the flow rate will be limited. It is also possible to enter the wastewater from the bottom and exit it from the wastewater. The sample is internally filtered, aggregated and measured. By installing the sampler valves, there will be a possibility to sample from different points of the column and the efficiency of different sections.

Carbon Column Filter
  • 167 views

Fine & Course Diffuser

[vc_row][vc_column][vc_column_text] In order to design and build pilot research and micro-model, it is sometimes necessary that, due to the lack of certain elements in small dimensions, the company is planning to design and manufacture some special equipment. The fine and coarse bubble diffuser are the same, which is now designed and constructed by the company specifically and unicolored. The diffuser is made up of two types of Fine Diffuser and Course Diffuser bubbles and is used in devices. The aerosol capacity of a large bubble diffuser is 20-50 liters per minute, and the aeration capacity of the bubble diffuser is 5-10 liters per minute. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1367,1371,1372,1373,1368,1369,1374" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Fine & Course Diffuser
  • 202 views

Electronic Specialty Board

[vc_row][vc_column][vc_column_text] The consultant will need to design and build some mechanical or electromechanical or electronic equipment for specific work, according to the requirements of any research or executive project. One of these equipment is an electronic board designed and built according to the design requirements. Although the company's approach is less moving, however, if necessary, and the vacuum of the equipment needed, the company is able to advance the expertise of the company and the outside elite, in order to build the equipment. The construction of some electronic specialized boards is the same as that used on some devices. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1378,1379,1380" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Electronic Specialty Board
  • 144 views

Multi Dosing Pump with Separate Flow Control

[vc_row][vc_column][vc_column_text] Our company ia capable of producing any kind of multi-dosing pump according to costumers demands in terms of quantity, shape and dosing capacity. The following figure includes 6 labotary dosing pumps with adjustable capacity of 0 to 4 l/hr. Each pump dosing is seperatly turned on and its flow is adjusted. It is possible to build the device with any other similar designs. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1292,1324,1323" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Multi Dosing Pump with Separate Flow Control
  • 157 views

Hallow Fiber Membrane Module

[vc_row][vc_column][vc_column_text] Our company has successfully designed and developed hollow fiber membrane modules for pilots and other demands. Different kinds of modules in term of shape and dimension can be produced and membranes will be provided according to costumers needs. Hollow fiber modules can be provided separately or installed in a specific pilot. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1276,1277,1326,1325" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Hallow Fiber Membrane Module
  • 235 views

Electrode

[vc_row][vc_column][vc_column_text] One of the needs of research pilots is different designed electrode. According to specific experiment, each pilot needs a special kind of electrode. Our company designs and provides special electrode to match any kind of experimental pilot. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1332" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Electrode
  • 100 views

Multi Dosing Pump with PLC Control and Separate Flows

In order to meet the costumers needs, our company has produced multi dosing pumps with PLC control. The following device shown here includes 4 dosing pumps with adjustable capacity of 0 to 4 lit/hr that can be programmed and switched on or off with PLC. The flow of each dosing is set to a specific number and PLC will switch them on or off separately according to the given command. These PLCs have 8 digital and analog inputs and 6 outputs to control 6 different devices. [vc_row][vc_column][vc_gallery type="image_grid" images="1321,1322" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Multi Dosing Pump with PLC Control and Separate Flows
  • 56 views

Wastewater Treatment Pilot Using UASB+A2O Method

[vc_row][vc_column][vc_column_text] This pilot was ordered by a master student of Khaje Nasir Tusi university in order to extract Kinetic parameters in industrial wastewater treatment plants using combine UASB and A2O methods. The pilot itself is consisted of two parts: 1- A UASB anaerobic unit including a process pillar with 20 mm diameter and 100 cm height as UASB reservoir, and 2- A wastewater treatment package using A2O method with general dimensions of 35*35*80 mm and 3 consecutive storage (anaerobic, aerobic, Anoxic). at the end a hopper sedimentation unit is used to deposit and return the sludge. An airlift system is used to return the combined liquids and sludge. This pilot has a 3 lit/sec capacity. A special multi dosing PLC control system was designed for this pilot.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1436,1437,1321" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Wastewater Treatment Pilot Using UASB+A2O Method
  • 78 views

Modular Straw Life

This device has been designed and tested to test and measure various elements in order to make the final device. The ability to increase and decrease the modules in this reel and to re The device shown in Figure 3 has 3 primary sand filters to remove garbage and coarse materials in water, carbon filter to remove soluble matter, flavor, odor and color, and a halophyte membrane with a pore size of 0.01 microns, which is capable of water To standard standards for drinking. [vc_row][vc_column][vc_gallery type="image_grid" images="1260,1257,1258,1259,1256,1255" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Modular Straw Life
  • 55 views

Straw Life

[vc_row][vc_column][vc_column_text] Straw life is used to treat water in-situ. This device is capable of providing the required drinkable water in emergency situations by removing the suspended and dissolved solids. Its consisted of 3 parts: Sand filtration to remove particles from water, Carbon filtration to remove dissolved solids, tastes, odor, color and Hollow fiber membranes (0.01 micron pore size) so that the water is usable for drinking purposes. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1268,1269" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Straw Life
  • 46 views

Flat Sheet Membrane

[vc_row][vc_column][vc_column_text] Our company has successfully designed and built flat sheet modules in order to build pilots. Flat sheets are build in different dimensions and shapes and membranes are chosen in accordance with the customers requirements. Our flat sheets can be provided separately or as modules. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1282,1280,1283,1281,1279,1284,1329,1328" img_size="120*120" css_animation="fadeInUp"][/vc_column][/vc_row]

Flat Sheet Membrane
  • 121 views

MBR Wastewater Treatment Pilot

[vc_row][vc_column][vc_column_text] This pilot was designed for a PhD thesis project in Ahvaz University. The capacity was 1~3 lit/hr with membrane technology. The model contained aeration and effluent storage tanks. Simple and low equipment design along with simple operating were key factors of this model. Membranes were provided by the costumer and flat sheet membrane design and fabrication were done in Rashab Tarh Company. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type="image_grid" images="1136,1137,1138" img_size="130*130" css_animation="fadeInUp"][/vc_column][/vc_row]

MBR Wastewater Treatment Pilot
  • 108 views